How I Achieved Maximum Success with Companies

Ways of Identifying a Slab Leak in the House

Many homeowners experience slab leaks from time to time. Sometimes, it becomes hard to tell a slab leak, and it may take time before the homeowner realizes there is a slab leak somewhere. When the pipes that are used for water piping bursts or weaken after prolonged use, slab leaks occur. When you notice a slab leak, you will need to look for a repipe specialist to fix the leaks.

There are several ways to know if you are having a slab leak, as outlined below. You check your water bill, and all of a sudden the bill is high as compared to the past months. Sudden high bills is a sign of a slab leakage. If the heating bill suddenly goes up, that is also a sign that you could be dealing with a slab leak. Look for a technician who specializes in repiping once you notice an increase in your water bills.

To detect a leakage, be keen on the sounds in the house especially during the night when there is little noise. Be keen and pay attention to the sound of running water in the foundation or floor. To be sure of the leak, turn off the taps and other plumbing appliances. If the sounds are clear; it is a sign there is a slab leakage.

Slab leaks can also be detected by occurrence of pools of water in different parts on the floor. With time, the ponds become more substantial as more leakage happens. The ponds can also start piling in areas where plumbing has been done, or in the kitchen, bathroom, toilet, laundry areas, etc. where there are water lines.

If you detect places on the floor that are warmer than the rest, that is also a sign of slab leak. If a hot water line leaks, the surrounding spots will be hot, and when walked on them, it feels like walking on hot coal. The hot water leaking from the water lines warms the concrete, and the floor automatically becomes warm.

Reduction of water pressure in the taps is also another sign that there is a slab leak. Leaking water along the water pipes caused reduced pressure of water getting to the water outlets. A repipe technician will help in determining the reasons why the pressure of the water has reduced, as well as detect if there is a slab leakage.

If the concrete has absorbed water from the slab leakage, and the after has remained in the concrete for a long time, there are chances of the floor cracking. A crack on the floor resulting from slab leak is not easy to tell or differentiate from other cracks resulting from other factors that cause cracks. To detect a crack caused by slab leakage, check if it is near water outlets spots such as kitchen, laundry areas, washroom, and bathroom, etc.

Lessons Learned About Professionals

A 10-Point Plan for Experts (Without Being Overwhelmed)